Mountain Grout Acrylate

Green Mountain Strong

Acrylate Product Description:

Acrylate is a fast-reacting, low viscosity, polymer used to seal water leaks in concrete structures and to stabilize soils. This product utilizes environmentally safe acrylic resins in conjunction with catalysts and accelerators. The system is typically pumped at a ratio of 1:1 when controlling active water leaks and at higher ratios with water when ultra-low viscosity is needed to penetrate fine soil particles. At a 1:1 ratio, the resulting product is a flexible elastomer. At a higher ratio of water to resin, a pliable gel results. For specific mix ratios for fine soils please contact Green Mountain International, Technical Services Department.

Typical Acrylate Application:

Acrylate is typically used to seal any leak below grade. The acrylate product is used extensively in tunnels of all types, below-grade parking garages, foundations, tanks, sewers, shafts and around large diameter pipes, cracked concrete and various failed construction joints.

Acrylate Advantages:

Non-hazardous shipping
Non-flammable
Non-hazardous when cured
Super-low viscosity
Easy clean-up
Reaction is site “adjustable”
Economical
100% Made in America

Packaging Sizes Available for Acrylate:

Acrylate is supplied in 275 gallon totes, 55 gallon drums, and 5 gallon pails. The accelerator and catalyst are supplied in plastic containers filled by weight as required.

Acrylate Storage:

Acrylate materials should be stored above 40 degrees fahrenheit and below 80 degrees fahrenheit in plastic (or stainless steel) containers at all times and must be kept separated prior to use. All equipment used to pump the product must be designed specifically for this acrylic formulation.

Use only stainless steel pumps and equipment due to the corrosive nature of the materials. Do not use aluminum components. SP and TEA components may form a toxic gas if mixed prior to field application. Follow manufacturer’s instructions carefully during mixing and application. Always wear protective clothing in accordance with current OSHA requirements. Avoid skin and eye contact. Do not ingest. Do not mix SP and TEA exclusively from other components.

For more information on our Acrylate or full line of Polyurethane products please call (800) 942-5151.

Acrylate Products

 

Technical Data Sheets

A Technical Data Sheet (“TDS”) is a document that provides typical physical properties and characteristics of specific products.  Mountain Grout® Technical Data Sheets are intended as a general guide to provide assistance regarding typical physical characteristics of the product. However, the specific values are affected by various factors, including, but not limited to, ambient temperature, water temperature, humidity, water pH, reaction under confinement, and the presence of chemicals or debris in the reaction area. Applicators are encouraged to perform sample tests with the variables found on site to get the best possible indication of the product’s physical properties for the specific job.

• Acrylate TDS

Safety Data Sheets

A Safety Data Sheet (“SDS”, also formerly known as a Material Safety Data Sheet) is a detailed informational document that describes the physical and chemical properties of a particular product.  The SDS includes information related to the properties of each chemical, such as:

1)  The physical, health, and environmental health hazards, if any;

2)  Protective measures; and

3)  Safety precautions for handling, storing, and transporting the chemical.

SDSs provide guidance for each specific chemical on matters, such as necessary personal protective equipment (PPE), first aid procedures, and spill clean-up procedures.  All applicable SDSs should be carefully read and fully understood prior to opening or using Mountain Grout products.

• Acrylate SDS
• Acrylate Accelerator (TEA) SDS
• Acrylate Catalyst (TEA) SDS